NAME
    s_server - SSL/TLS server program

SYNOPSIS
    openssl s_server [-accept port] [-context id] [-verify depth] [-Verify
    depth] [-cert filename] [-key keyfile] [-dcert filename] [-dkey key-
    file] [-dhparam filename] [-nbio] [-nbio_test] [-crlf] [-debug] [-msg]
    [-state] [-CApath directory] [-CAfile filename] [-nocert] [-cipher
    cipherlist] [-quiet] [-no_tmp_rsa] [-ssl2] [-ssl3] [-tls1] [-no_ssl2]
    [-no_ssl3] [-no_tls1] [-no_dhe] [-bugs] [-hack] [-www] [-WWW] [-HTTP]
    [-engine id] [-rand file(s)]

DESCRIPTION
    The s_server command implements a generic SSL/TLS server which listens
    for connections on a given port using SSL/TLS.

OPTIONS
    -accept port
   the TCP port to listen on for connections. If not specified 4433 is
   used.

    -context id
   sets the SSL context id. It can be given any string value. If this
   option is not present a default value will be used.

    -cert certname
   The certificate to use, most servers cipher suites require the use
   of a certificate and some require a certificate with a certain pub-
   lic key type: for example the DSS cipher suites require a certifi-
   cate containing a DSS (DSA) key. If not specified then the filename
   "server.pem" will be used.

    -key keyfile
   The private key to use. If not specified then the certificate file
   will be used.

    -dcert filename, -dkey keyname
   specify an additional certificate and private key, these behave in
   the same manner as the -cert and -key options except there is no
   default if they are not specified (no additional certificate and
   key is used). As noted above some cipher suites require a certifi-
   cate containing a key of a certain type. Some cipher suites need a
   certificate carrying an RSA key and some a DSS (DSA) key. By using
   RSA and DSS certificates and keys a server can support clients
   which only support RSA or DSS cipher suites by using an appropriate
   certificate.

    -nocert
   if this option is set then no certificate is used. This restricts
   the cipher suites available to the anonymous ones (currently just
   anonymous DH).

    -dhparam filename
   the DH parameter file to use. The ephemeral DH cipher suites gener-
   ate keys using a set of DH parameters. If not specified then an
   attempt is made to load the parameters from the server certificate
   file. If this fails then a static set of parameters hard coded into
   the s_server program will be used.

    -no_dhe
   if this option is set then no DH parameters will be loaded effec-
   tively disabling the ephemeral DH cipher suites.

    -no_tmp_rsa
   certain export cipher suites sometimes use a temporary RSA key,
   this option disables temporary RSA key generation.

    -verify depth, -Verify depth
   The verify depth to use. This specifies the maximum length of the
   client certificate chain and makes the server request a certificate
   from the client. With the -verify option a certificate is requested
   but the client does not have to send one, with the -Verify option
   the client must supply a certificate or an error occurs.

    -CApath directory
   The directory to use for client certificate verification. This
   directory must be in "hash format", see verify for more informa-
   tion. These are also used when building the server certificate
   chain.

    -CAfile file
   A file containing trusted certificates to use during client authen-
   tication and to use when attempting to build the server certificate
   chain. The list is also used in the list of acceptable client CAs
   passed to the client when a certificate is requested.

    -state
   prints out the SSL session states.

    -debug
   print extensive debugging information including a hex dump of all
   traffic.

    -msg
   show all protocol messages with hex dump.

    -nbio_test
   tests non blocking I/O

    -nbio
   turns on non blocking I/O

    -crlf
   this option translated a line feed from the terminal into CR+LF.

    -quiet
   inhibit printing of session and certificate information.

    -ssl2, -ssl3, -tls1, -no_ssl2, -no_ssl3, -no_tls1
   these options disable the use of certain SSL or TLS protocols. By
   default the initial handshake uses a method which should be compat-
   ible with all servers and permit them to use SSL v3, SSL v2 or TLS
   as appropriate.

    -bugs
   there are several known bug in SSL and TLS implementations. Adding
   this option enables various workarounds.

    -hack
   this option enables a further workaround for some some early
   Netscape SSL code (?).

    -cipher cipherlist
   this allows the cipher list used by the server to be modified.
   When the client sends a list of supported ciphers the first client
   cipher also included in the server list is used. Because the client
   specifies the preference order, the order of the server cipherlist
   irrelevant. See the ciphers command for more information.

    -www
   sends a status message back to the client when it connects. This
   includes lots of information about the ciphers used and various
   session parameters. The output is in HTML format so this option
   will normally be used with a web browser.

    -WWW
   emulates a simple web server. Pages will be resolved relative to
   the current directory, for example if the URL
   https://myhost/page.html is requested the file ./page.html will be
   loaded.

    -HTTP
   emulates a simple web server. Pages will be resolved relative to
   the current directory, for example if the URL
   https://myhost/page.html is requested the file ./page.html will be
   loaded. The files loaded are assumed to contain a complete and cor-
   rect HTTP response (lines that are part of the HTTP response line
   and headers must end with CRLF).

    -engine id
   specifying an engine (by it's unique id string) will cause s_server
   to attempt to obtain a functional reference to the specified
   engine, thus initialising it if needed. The engine will then be set
   as the default for all available algorithms.

    -rand file(s)
   a file or files containing random data used to seed the random num-
   ber generator, or an EGD socket (see RAND_egd(3)). Multiple files
   can be specified separated by a OS-dependent character. The sepa-
   rator is ; for MS-Windows, , for OpenVMS, and : for all others.

CONNECTED COMMANDS
    If a connection request is established with an SSL client and neither
    the -www nor the -WWW option has been used then normally any data
    received from the client is displayed and any key presses will be sent
    to the client.

    Certain single letter commands are also recognized which perform spe-
    cial operations: these are listed below.

    q  end the current SSL connection but still accept new connections.

    Q  end the current SSL connection and exit.

    r  renegotiate the SSL session.

    R  renegotiate the SSL session and request a client certificate.

    P  send some plain text down the underlying TCP connection: this
   should cause the client to disconnect due to a protocol violation.

    S  print out some session cache status information.

NOTES
    s_server can be used to debug SSL clients. To accept connections from a
    web browser the command:

 openssl s_server -accept 443 -www

    can be used for example.

    Most web browsers (in particular Netscape and MSIE) only support RSA
    cipher suites, so they cannot connect to servers which don't use a cer-
    tificate carrying an RSA key or a version of OpenSSL with RSA disabled.

    Although specifying an empty list of CAs when requesting a client cer-
    tificate is strictly speaking a protocol violation, some SSL clients
    interpret this to mean any CA is acceptable. This is useful for debug-
    ging purposes.

    The session parameters can printed out using the sess_id program.

BUGS
    Because this program has a lot of options and also because some of the
    techniques used are rather old, the C source of s_server is rather hard
    to read and not a model of how things should be done. A typical SSL
    server program would be much simpler.

    The output of common ciphers is wrong: it just gives the list of
    ciphers that OpenSSL recognizes and the client supports.

    There should be a way for the s_server program to print out details of
    any unknown cipher suites a client says it supports.

SEE ALSO
   sess_id(1),s_client(1),ciphers(1)